KJLC MAPS HTE Series AC Power Supplies
HTR Series shown for reference only. HTE Series similar.
Our MAPS HTE Series AC power supplies are suited for high temperature evaporation of metals and inorganic materials using medium-voltage, low-current sources.
Our MAPS HTE Series is configured for the control of medium-voltage, low-current sources. These sources can range from high-temperature Knudsen Cell evaporation sources to small “button-style” sample heaters.
These units can be operated in one of three modes:
- Manually, in “auto tuning” mode
- Incorporating closed-loop, PID, temperature control
- “Rate control” mode when used with an external thin film controller
Features
- Microprocessor-based programmable temperature controller
- Ability to store multiple programs for multiple organic materials and vacuum preparation routines
- Controller preprogrammed for Type-K thermocouple interface
- Type-K thermocouple input connectors standard (others available)
- Digital temperature and set point
- Phase-angle fired SCR output
- Integrated current transducer
- RS-232 interface for remote PID control
- BNC connection for rate control
| HTE Series | |
| Power Output | 1kW |
| Input Voltage | 120 VAC / 240 VAC |
| Output Voltage | 24 VAC |
| Input Current | 10 Amps @ 120 VAC 5 Amps @ 240 VAC |
| Output Current | 40 Amps |
| Frequency | 50/60 Hz |
| Fusing | 1, 2 FU: 5 x 20 mm 250mA (for internal component protection) 3, 4 FU: 10 x 38 mm (amperage rating model specific, branch rated, for power output) |
| Output Connector | PowerCon® locking 3-conductor |
| Dimensions | 5.22" H x 8.37" W x 16" D (not including connections) |
MAPS HTE Series Power Supplies
Prices below are for the bare power supply only. Mounting and interconnect cabling sold separately.
| Description | Part No. | Price (USA) |
Add To Cart |
|---|---|---|---|
Contact our Process Equipment Division for more information and to discuss your specific process application requirements.