KJLC MAPS HTR Series AC Power Supplies
Our MAPS HTR Series AC power supplies are suited for process heating up to 8kW.
Our MAPS HTR Series is a complete temperature controller and power supply for use with HV and UHV sample heaters, as well as other resistive heating elements. These units can provide manual output control, as well as programmable temperature control of ramp rate, presoak, and soak times via an integrated PID controller. This closedloop control can be initiated locally from the controller on the front panel of the supply, or remotely from a PC or PLC.
Features
- Microprocessor-based programmable temperature controller
- Microprocessor-based limit controller for over-temperature protection
- Controllers preprogrammed for Type-K thermocouple interface
- Type-K thermocouple input connectors
- Digital temperature, set point, and over-temperature readout
- Phase-angle fired SCR output
- Integrated current transducer
- RS-232 interface for remote PID control
- BNC connection for rate control
| 2kW Version | 4kW Version | 6kW Version | 8kW Version | |
| Power Output | 2kW | 4kW | 6kW | 8kW |
| Input Voltage | 120 VAC / 240 VAC | 240 VAC | 240 VAC | 240 VAC |
| Output Voltage | 120 VAC / 240 VAC | 240 VAC | 240 VAC | 240 VAC |
| Input Current | 20 Amps (max) | 20 Amps (max) | 30 Amps (max) | 40 Amps (max) |
| Output Current | 20 Amps (max) | 20 Amps (max) | 30 Amps (max) | 40 Amps (max) |
| Frequency | 50/60 Hz | 50/60 Hz | 50/60 Hz | 50/60 Hz |
| Output Connector | PowerCon® locking 3-conductor | Terminal Block | Terminal Block | |
| Dimensions | 5.22" H x 8.37" W x 16" D (not including connections) |
|||
MAPS HTR Series Power Supplies
Prices below are for the bare power supply only. Mounting and interconnect cabling sold separately.
| Description | Part No. | Price (USA) |
Add To Cart |
|---|---|---|---|
Contact our Process Equipment Division for more information and to discuss your specific process application requirements.