KJLC MAPS LTE Series AC Power Supplies
EVP Series shown for reference only. LTE Series similar.
Our MAPS LTE Series AC power supplies are suited for low temperature evaporation of organic materials by providing low-voltage, low-current control over the OLED source.
Our MAPS LTE Series is configured for use with our “LTE” OLED deposition sources and designed to provide highly stable low-voltage, low-current control of the evaporation of organic materials.
These units can be operated in one of three modes:
- Manually, in “auto tuning” mode
- Incorporating closed-loop, PID, temperature control
- “Rate control” mode when used with an external thin film controller
Features
- Microprocessor-based programmable temperature controller
- Ability to store multiple programs for multiple organic materials and vacuum preparation routines
- Controller preprogrammed for Type-K thermocouple interface
- Type-K thermocouple input connectors standard (others available)
- Digital temperature and set point
- Phase-angle fired SCR output
- Integrated current transducer
- RS-232 interface for remote PID control
- BNC connection for rate control
| LTE Series | |
| Power Output | 200W |
| Input Voltage | 120 VAC / 240 VAC |
| Output Voltage | 12 VAC |
| Input Current | 2 Amps @ 120 VAC 1 Amps @ 240 VAC |
| Output Current | 15 Amps |
| Frequency | 50/60 Hz |
| Fusing | 1, 2 FU: 5 x 20 mm 250mA (for internal component protection) 3, 4 FU: 10 x 38 mm (amperage rating model specific, branch rated, for power output) |
| Output Connector | PowerCon® locking 3-conductor |
| Dimensions | 5.22" H x 8.37" W x 16" D (not including connections) |
MAPS LTE Series Power Supplies
Prices below are for the bare power supply only. Mounting and interconnect cabling sold separately.
| Description | Part No. | Price (USA) |
Add To Cart |
|---|---|---|---|
Contact our Process Equipment Division for more information and to discuss your specific process application requirements.

