Welcome to the Kurt J. Lesker Company.  

Sign In | Register

Current Region: International (Change) | Contact Us |   RSS   Twitter   LinkedIn   YouTube

Close

Please select your country or region to be
directed to the appropriate Lesker site.

Nickel Chromium (Ni/Cr) Sputtering Targets

Overview

Our comprehensive offering of sputtering targets, evaporation sources and other deposition materials is listed by material throughout the website. Below you will find budgetary pricing for sputtering targets and deposition materials per your requirements. Actual prices may vary due to market fluctuations. Contact international@lesker.com for current pricing or for a quote on sputtering targets and other deposition products not listed.


Specifications

Material TypeNichrome IV®
SymbolNi/Cr
Melting Point (°C)1,395
Theoretical Density (g/cc)8.5
FerromagneticMagnetic Material
Z Ratio**1.00
SputterDC
Type of BondIndium, Elastomer
CommentsAlloys with W/Ta/Mo.

** The z-ratio is unknown. Therefore, we recommend using 1.00 or an experimentally determined value. Please click here for instructions on how to determine this value.

Z-Factors

Empirical Determination of Z-Factor

Unfortunately, Z Factor and Shear Modulus are not readily available for many materials. In this case, the Z-Factor can also be determined empirically using the following method:

  • Deposit material until Crystal Life is near 50%, or near the end of life, whichever is sooner.
  • Place a new substrate adjacent to the used quartz sensor.
  • Set QCM Density to the calibrated value; Tooling to 100%
  • Zero thickness
  • Deposit approximately 1000 to 5000 A of material on the substrate.
  • Use a profilometer or interferometer to measure the actual substrate film thickness.
  • Adjust the Z Factor of the instrument until the correct thickness reading is shown.

Another alternative is to change crystals frequently and ignore the error. The graph below shows the % Error in Rate/Thickness from using the wrong Z Factor. For a crystal with 90% life, the error is negligible for even large errors in the programmed versus actual Z Factor.


SDS
Click here for the Nickel Chromium SDS.
Request A Quote
Can't find the size or material you need? Please use our Materials Quotation Form to request.
Deposition Materials FAQ
Click here for answers to some of the most common questions we get asked.
Contact Us
To speak with someone directly, please call 1-412-387-9200 or email international@lesker.com.

Ordering Table

Material Size Purity Compatible Guns Part # Price Add To
Cart
Material Size Purity Compatible Guns Part # Price Add To
Cart
Nickel Chromium 1.00" Dia. x 0.125" Thick 99.9% All Standard Guns EJTNICR301A2 $135.00
Nickel Chromium 1.00" Dia. x 0.250" Thick 99.9% All Standard Guns EJTNICR301A4 P.O.R.
Nickel Chromium 2.00" Dia. x 0.125" Thick 99.9% All Standard Guns EJTNICR302A2 $185.00
Nickel Chromium 2.00" Dia. x 0.250" Thick 99.9% All Standard Guns EJTNICR302A4 $215.00
Nickel Chromium 3.00" Dia. x 0.125" Thick 99.9% All Standard Guns EJTNICR303A2 $275.00
Nickel Chromium 3.00" Dia. x 0.125" Thick 99.95% All Standard Guns EJTNICR353A2 P.O.R.
Nickel Chromium 3.00" Dia. x 0.250" Thick 99.9% All Standard Guns EJTNICR303A4 $290.00
Nickel Chromium 4.00" Dia. x 0.125" Thick 99.9% All Standard Guns EJTNICR304A2 $290.00
Nickel Chromium 4.00" Dia. x 0.250" Thick 99.9% All Standard Guns EJTNICR304A4 P.O.R.
Nickel Chromium 6.00" Dia. x 0.125" Thick 99.95% All Standard Guns EJTNICR356A2 P.O.R.
Nickel Chromium 6.00" Dia. x 0.250" Thick 99.95% All Standard Guns EJTNICR356A4 P.O.R.

 

Kurt J Lesker Company Logo

Buy Online or Call
+1 412 387 9200

ISO:9001 The Kurt J. Lesker Company is an ISO:9001 certified company. Copyright ©1996-2017 Kurt J. Lesker Company® All rights reserved.