Welcome to the Kurt J. Lesker Company.  

Sign In | Register

Current Region: International (Change) | Contact Us |   RSS   Twitter   LinkedIn   YouTube

Close

Please select your country or region to be
directed to the appropriate Lesker site.

Feedthrough Questionnaire


Please fill in this form as completely as possible and a KJLC representative will contact you as quickly as possible to provide further information.

1.) If based on an existing part number, please specify.
(Not required)

2.) How many of this configuration would you like?

3.) Vacuum Range?

Unit for Vacuum Range?

  
  

4.) Temperature?

5.) Flange Options?

Min

Max

Unit for Temperature?



Flange Type

     
     

Flange Size

Flange Size

Flange Size

Flange Size

Flange Size

Flange Size

6.) Select the types of feedthroughs you would like on your custom configuration below. (Please tick all that apply)

Power Feedthrough

Instrumentation Feedthrough

Thermocouple Feedthrough

LiquidGas or LN2 Feedthrough

Note: Use the green plus symbol to add more feedthroughs of that type to your customer configuration.

Power Feedthrough(s):

Is this feedthrough based on an existing design?

 No    Yes

If yes, please enter the part number.

{{getByIndex("partDesc_q6_powerexistingPartNumber_01__powerfeedthroughs__", $index)}}

Quantity

Please fill out the following specs:

Number of Conductors

Voltage (V)

DC/AC

 DC
 AC

Amperage (A)

Frequency (Hz)
(If Applicable)

Conductor Material

If Other, please specify

Conductor Diameter
(Not required)

Units for
Diameter?

 mm
 in

Pin Type

 Solid
 Hollow



Additional Notes/Comments for Power Feedthrough(s)?


Instrumentation Feedthrough(s):

Is this feedthrough based on an existing design?

 No    Yes

If yes, please enter the part number.

{{getByIndex("partDesc_q6_instrumentexistingPartNumber_01__instrumentationfeedthroughs__", $index)}}

Quantity

Please fill out the following specs:

Quantity

Feedthrough Type

Termination

Termination

Shield

 Grounded
 Floating
 Not Sure

Impedance

 Unmatched
 50 Ohm Matched
 Not Sure

Pins

 3 Pin
 6 Pin
 10 Pin
 19 Pin
 32 Pin
 41 Pin
 N/A

Pins

 4 Pin
 6 Pin
 10 Pin
 20 Pin
 35 Pin
 N/A

Pins

 9 Pin
 18 Pin
 N/A

Pins

 9 Pin
 15 Pin
 25 Pin
 37 Pin
 50 Pin
 N/A

Pins

 26 Pin
 44 Pin
 N/A

Pins

 9 Pin
 15 Pin
 21 Pin
 25 Pin
 37 Pin
 51 Pin
 100 Pin
 N/A

Current

 Standard Current
 High Current
 Not Sure

Voltage (V)

Frequency (Hz)

Amperage (A)



Additional Notes/Comments for Instrumentation Feedthrough(s)?


Thermocouple Feedthrough(s):

Is this feedthrough based on an existing design?

 No    Yes

If yes, please enter the part number.

{{getByIndex("partDesc_q6_thermocoupleexistingPartNumber_01__thermocouplefeedthroughs__", $index)}}

Quantity

Please fill out the following specs:

Number of Pairs

Connector Type Vac

Loops Mil-Spec Plug Nut/Bolt Pins Probe Tip

Connector Type Vac

Loops Mil-Spec Plug Nut/Bolt Pins Probe Tip

Connector Type Vac

Loops Mil-Spec Plug Nut/Bolt Pins Probe Tip

Connector Type Air

Loops Mil-Spec Plug Miniature Plug Pins

Connector Type Air

Loops Mil-Spec Plug Miniature Plug Pins



Additional Notes/Comments for Thermocouple Feedthrough(s)?


Liquid/Gas or LN2 Feedthrough(s):

Is this feedthrough based on an existing design?

 No    Yes

If yes, please enter the part number.

{{getByIndex("partDesc_q6_liquidGasexistingPartNumber_01__liquidfeedthroughs__", $index)}}

Quantity

Please fill out the following specs:

Number of Tubes

Tube Diameter

ATM Length

ATM Tube 1:

ATM Tube 2:

ATM Tube 2:

ATM Tube 3:

ATM Tube 2:

ATM Tube 3:

ATM Tube 4:

Vac Side Length

Vac Tube 1:

Vac Tube 2:

Vac Tube 2:

Vac Tube 3:

Vac Tube 2:

Vac Tube 3:

Vac Tube 4:

Units for ATM/VAC Lengths?

 mm
 in

ATM Terminations

Vac Side Terminations



Additional Notes/Comments for Liquid/Gas or LN2 Feedthrough(s)?


7.) If you have drawing(s) to provide please upload:
(Please keep uploaded file size below 10Mb.
Accepted file types include: PDF, JPG and PNG.



8.) Additional Notes/Comments?

Contact Information:

Name:*

Title:

Organization:*

Email:*

Phone:*

Fax:

Street:*

City:*

Postal/Zip Code:*

Country:*

State:*

Returning KJLC customer?:*

* = Required


Security Measure: The image with crazy numbers below is called a "CAPTCHA" and it's used to figure out if you're a person or a computer. Please solve the simple math problem below to verify you are a legitimate user.

four + eight equal

Type Your Answer Here


ISO:9001 The Kurt J. Lesker Company is an ISO:9001 certified company. Copyright ©1996-2018 Kurt J. Lesker Company® All rights reserved.