KL-320K Vacuum Epoxy Glue
Use these epoxy adhesives for vacuum sealing or structural bonding in vacuum chambers.
- Milky-colored epoxy glue with high electrical resistivity and excellent resistance to solvents, lubricants, alcohol, mild acids, and alkalies
- Used for structural joining inside the vacuum envelope where nuts/bolts are inappropriate. For example: Mounting a component to a thin chamber wall where drilling or tapping are not possible.
NOTE: Open the package and remove one sachet. Slide the separator from the sachet’s center to enable the components to mix. Knead the sachet, thoroughly mixing the contents to a uniform consistency. Slit open the package and apply the epoxy as required.
Although warming any epoxy (between 50° C and 80° C) during curing shortens the curing time and increases the final bond strength, it leads to initially decreasing viscosity and may cause drips—leading to unintended seals and additional outgassing.
|Coeff. of Expansion|
All dimensions listed below, unless otherwise stated, are in grams.