Push-Pull KLPD Series (Manual & Pneumatic)
Push-Pull Drives — Manual
- UHV linear positioners with 25, 51, 102, and 153 mm travel
- Mounting flanges are 1-1/3" O.D. CF and 2-3/4" O.D. CF flanges
- Bakeable to 200°C with handle or pneumatic cylinder removed
- Operating pressure 1 atm to 10-11 Torr
- Edge-welded bellows seal
- Adjustable travel limit lock
- 3/8" O.D. output shaft with M4 tapped mounting holes
- Applications include: shutters, beam stops, and other linear-motion needs
- Double acting 3/4" bore cylinder, maximum operating pressure 17.2 Bar (250 psi)
- Two ports (open/close) to accept 1/8” NPT Male fittings – Fittings NOT supplied with drive
- Internal magnet within cylinder, provides the option of using reed switches for position feedback
- Measurements taken using 6" drives, mounted with extension indicator pin vertical.
- 1", 2" and 4" Drives have deflection rates that correspond with the Extended Length shown on the chart.
- Max Load (Drive Axis vertical): 4.5Kg (5.4 lbs)