Welcome to the Kurt J. Lesker Company.  

Sign In | Register

Current Region: International (Change) | Contact Us |   RSS   Twitter   LinkedIn   YouTube

Close

Please select your country or region to be
directed to the appropriate Lesker site.

Ferro-Magnetic Fluid Rotary Feedthroughs Solid Shaft


Sample Manipulation and Motion > Rotary Motion > Ferro-Magnetic Solid Shafts > 

Ferro-Magnetic Fluid Rotary Feedthroughs Solid Shaft

CF Flanged Solid Shaft Ferrodrives O-Ring Flanged Solid Shaft Ferrodrives Thread Mount Solid Shaft Ferrodrives Baseplate Mount Solid Shaft Ferrodrives
CF Flanged Solid Shaft Ferrodrives O-Ring Flanged Solid Shaft Ferrodrives Thread Mount Solid Shaft Ferrodrives Baseplate Mount Solid Shaft Ferrodrives
CF flanged rotary motion feedthroughs routinely operate in the 10-6 Torr range and, when properly prepared and installed, may be used to mid 10-10 Torr using ConFlat compatible (CF) Mounting Flanges. These Ferro-Magnetic Fluid sealed rotary drives are designed for high vacuum applications where the chamber port has a flat, polished outer surface suitable for seating an o-ring surrounding a hole through the vacuum wall. These Ferro-Magnetic Fluids sealed rotary feedthroughs are sealed to a flat surface by a fluorocarbon o-ring. These Ferro-Magnetic Fluid sealed rotary feedthroughs are sealed to the baseplate by a fluorocarbon o-ring.

FerroTec Ferrodrives Solid Shaft

CF Flanged Solid Shaft Ferrodrives O-Ring Flanged Solid Shaft Ferrodrives Thread Mount Solid Shaft Ferrodrives Baseplate Mount Solid Shaft Ferrodrives
CF Flanged Solid Shaft Ferrodrives O-Ring Flanged Solid Shaft Ferrodrives Thread Mount Solid Shaft Ferrodrives Baseplate Mount Solid Shaft Ferrodrives
Designed to provide rotary motion under high vacuum, these ferrofluid feedthroughs have ConFlat-compatible (CF) mounting flanges. These Ferrofluidic® rotary drives are designed for high vacuum applications where the chamber port has a flat, polished outer surface suitable for seating an o-ring surrounding a hole through the vacuum wall. These ferrofluid rotary feedthroughs are sealed by a fluorocarbon o-ring. They will accommodate various wall thicknesses when used with a sleeve or spacer over the unthreaded portion so that the nut compresses the o-ring. These ferrofluid rotary feedthroughs are sealed to the baseplate by a fluorocarbon o-ring. The operator mounts these drives to the vacuum chamber by screwing them into a corresponding threaded hole, or on some models by placing them in a suitable smooth-sided port in the chamber wall.

For a listing of Frequently Asked Questions (FAQs) about Manipulation & Motion please see this link: Manipulation & Motion FAQ.

ISO:9001 The Kurt J. Lesker Company is an ISO:9001 certified company. Copyright ©1996-2017 Kurt J. Lesker Company® All rights reserved.