Welcome to the Kurt J. Lesker Company.  

Sign In | Register

Current Region: International (Change) | Contact Us |   RSS   Twitter   LinkedIn   YouTube

Close

Please select your country or region to be
directed to the appropriate Lesker site.

MagiDrive™ UHV Hollow Shaft Series


MD40H MicroDrive Rotary Feedthrough MD35LB MagiDrive Rotary Feedthrough MD64H MagiDrive Rotary Feedthrough
MD40H (CF40, 2.75"OD) Hollow MagiDrive™ Rotary Feedthrough MD35LB (CF38, 2.75"OD)
MagiDrive Rotary Feedthrough
MD64H (CF64, 4.5"OD)
MagiDrive Rotary Feedthrough
The MD40H is a medium torque, medium stiffness rotary drive. Configured with a hollow body the MD40H has a rear fixed CF16 flange enabling a component to pass through the center, such as UHV Design's cold lance, or a second MagiDrive rotary feedthrough. The MD35LB is a higher torque version of the standard MD35 drive and has a much larger clear bore of 27mm. Whereas the standard MD35 has a fixed CF16 rear flange, the MD35LB has a CF38 flange to accommodate the larger through bore and the flange is also rotatable. The MD64H MagiDrive provides high power rotation through a high stiffness coupling. This drive is ideally suited to platen rotation or robot type applications. The MD64H has a rear rotatable flange enabling a component to pass through the center such as UHV Design's cold lance, or a second MagiDrive rotary feedthrough.
MD64LB MagiDrive Rotary Feedthrough MD100H MagiDrive Rotary Feedthrough
MD64LB (CF64, 4.5"OD)
MagiDrive Rotary Feedthrough
MD100H (CF100, 6"OD)
MagiDrive Rotary Feedthrough
The MD64LB is a larger version of the MD35LB drive and has a larger clear bore of 48.5mm. Whereas the standard MD64H has a fixed CF35 rear flange, the MD64LB has a CF64 rear flange to accommodate the larger through bore and the flange is also rotatable. The MD100H is selected for demanding high torque and stiffness applications, such as indexing robots or rotating large loads. The MD100H has the largest clear bore in the range and a rear rotatable flange. This enables a component to pass through the center such as UHV Design's cold lance, or a second MagiDrive rotary feedthrough.

For a listing of Frequently Asked Questions (FAQs) about Manipulation & Motion please see this link: Manipulation & Motion FAQ.

ISO:9001 The Kurt J. Lesker Company is an ISO:9001 certified company. Copyright ©1996-2017 Kurt J. Lesker Company® All rights reserved.