Models:
SD-versions for applications with dust-free, non-corrosive gases.
The SD-version is designed for applications with clean (dust-free) and non-corrosive gases. The standard pumps are equipped with gas ballast equipment in order to improve the pumping of light gases and to avoid the condensation of steam inside the pumps. Three gas ballast options fulfill the customer requirements as needed.
G-versions for usage by low quantities of corrosive gases.
The G-version may transport traces of corrosive gases. An inert flushing gas protects low pressure and high pressure bearings and dilutes the corrosive mediums in the suction chamber.
CV-versions for applications with condensible vapors.
The CV-version is specially designed for avoiding vapor condensation inside the pump block. This occurs through:
- A high gas ballast throughput for heating up pumps and diluting condensable gases.
- A silencer with drain screws for releasing liquid at the lowest point of the exhaust.
- Flushing gas injection to protect the ball bearing and the shaft seals.
- The CV version has a water vapor capacity of up to 1,000 grams per hour.
Features:
- Ideal replacement for scroll and oil-sealed pumps
- Air cooling - No installation and operational costs for water supply
- Frequency converter - Hour meter, remote operation mode (RS-485, dry contacts), multiple rotational speed selection (power saving, noise reduction, adaptation to application cycle)
- Several gas port options - Purge gas, gas ballast, other specific ports according to application
- Universal power supply - Wide voltage supply 50/60 Hz single-phase and three-phase
- Standards - Compliance with CE standards, UL/CSA certified, SEMI S2 certified
Applications:
- Electron microscopes
- Surface analyzers
- Leak detectors
- Mass spectometers
- Optical spectrometers
- Particle accelerators
- Turbo pumping stations
- Laboratories
- Lamp manufacturing
- Vacuum coating
- Cryo pumps regeneration
- Plasma cleaning
- Drying
- Load-lock
Videos
Specifications Table
Pump Model | ACP 15 | ACP 28 | ACP 40 | ACP 90 |
---|---|---|---|---|
Pumping Speeds |
50 (Hz)
8.24 CFM 233 L/min 3.89 L/s 14.0 m3/hr
60 (Hz)
8.24 CFM 233 L/min 3.89 L/s 14.0 m3/hr |
50 (Hz)
15.9 CFM 450 L/min 7.50 L/s 27.0 m3/hr
60 (Hz)
15.9 CFM 450 L/min 7.50 L/s 27.0 m3/hr |
50 (Hz)
21.8 CFM 616 L/min 10.3 L/s 37.0 m3/hr
60 (Hz)
21.8 CFM 616 L/min 10.3 L/s 37.0 m3/hr |
50 (Hz)
51.8 CFM 1466 L/min 24.4 L/s 88.0 m3/hr
60 (Hz)
51.8 CFM 1466 L/min 24.4 L/s 88.0 m3/hr |
Max Water Vapor Pumping Rate (with gas ballast) |
80.0 g/hr | 120 g/hr | 120 g/hr | 240 g/hr |
Ultimate Pressure |
Total With Gas Ballast
3.00 x 10-1 hPA 3.00 x 10-1 mbar 30.0 Pa 2.25 x 10-1 Torr
Total Without Gas Ballast
5.00 x 10-2 hPA 5.00 x 10-2 mbar 5.00 Pa 3.75 x 10-2 Torr |
Total With Gas Ballast
2.00 x 10-1 hPA 2.00 x 10-1 mbar 20.0 Pa 1.50 x 10-1 Torr
Total Without Gas Ballast
4.00 x 10-2 hPA 4.00 x 10-2 mbar 4.00 Pa 3.00 x 10-2 Torr |
Total With Gas Ballast
2.00 x 10-1 hPA 2.00 x 10-1 mbar 20.0 Pa 1.50 x 10-1 Torr
Total Without Gas Ballast
4.00 x 10-2 hPA 4.00 x 10-2 mbar 4.00 Pa 3.00 x 10-2 Torr |
Total With Gas Ballast
1.00 x 10-1 hPA 1.00 x 10-1 mbar 10.0 Pa 7.50 x 10-2 Torr
Total Without Gas Ballast
3.00 x 10-2 hPA 3.00 x 10-2 mbar 3.00 Pa 2.00 x 10-2 Torr |
Motor Power HP (kW) | 0.60 ( 0.45 ) | 0.94 ( 0.70 ) | 0.94 ( 0.70 ) | 1.72 ( 1.28 ) |
Inlet Flange | KF25 |
KF25 |
KF40 |
KF40 |
Exhaust Flange | KF16 |
KF25 |
KF25 |
KF40 |
Compression Stages | 6 |
6 |
6 |
6 |
Series | Standard |
Standard |
Standard |
Standard |
Weight Lbs (kg) | 51.0 ( 23.0 ) | 66.1 ( 30.0 ) | 70.5 ( 32.0 ) | 165 ( 75.0 ) |
Dimensions in. (mm.) | 20.2 x 7.50 x 10.6 (514 x 190 x 270 ) | 24.7 x 7.60 x 12.7 (627 x 193 x 322 ) | 24.7 x 7.60 x 12.7 (627 x 193 x 322 ) | 26.4 x 12.6 x 12.8 (671 x 319 x 324 ) |
Lubrication Type | Dry |
Dry |
Dry |
Dry |
Technology Type | Multi-Stage Roots |
Multi-Stage Roots |
Multi-Stage Roots |
Multi-Stage Roots |
Pump Model | ACP 15 G | ACP 28 G | ACP 40 G | ACP 90 G |
---|---|---|---|---|
Pumping Speeds |
50 (Hz)
8.24 CFM 233 L/min 3.89 L/s 14.0 m3/hr
60 (Hz)
8.24 CFM 233 L/min 3.89 L/s 14.0 m3/hr |
50 (Hz)
15.9 CFM 450 L/min 7.50 L/s 27.0 m3/hr
60 (Hz)
15.9 CFM 450 L/min 7.50 L/s 27.0 m3/hr |
50 (Hz)
21.8 CFM 616 L/min 10.3 L/s 37.0 m3/hr
60 (Hz)
21.8 CFM 616 L/min 10.3 L/s 37.0 m3/hr |
50 (Hz)
51.8 CFM 1466 L/min 24.4 L/s 88.0 m3/hr
60 (Hz)
51.8 CFM 1466 L/min 24.4 L/s 88.0 m3/hr |
Max Water Vapor Pumping Rate (with gas ballast) |
80.0 g/hr | 120 g/hr | 120 g/hr | |
Ultimate Pressure |
Total Without Gas Ballast
3.00 x 10-1 hPA 3.00 x 10-1 mbar 30.0 Pa 2.25 x 10-1 Torr |
Total Without Gas Ballast
4.00 x 10-2 hPA 4.00 x 10-2 mbar 4.00 Pa 3.00 x 10-2 Torr |
Total Without Gas Ballast
4.00 x 10-2 hPA 4.00 x 10-2 mbar 4.00 Pa 3.00 x 10-2 Torr |
Total Without Gas Ballast
3.00 x 10-2 hPA 3.00 x 10-2 mbar 3.00 Pa 2.00 x 10-2 Torr |
Motor Power HP (kW) | 0.60 ( 0.45 ) | 0.94 ( 0.70 ) | 0.94 ( 0.70 ) | |
Inlet Flange | KF25 |
KF25 |
KF40 |
KF40 |
Exhaust Flange | KF16 |
KF25 |
KF25 |
KF40 |
Compression Stages | 6 |
6 |
6 |
6 |
Series | Standard |
Standard |
Standard |
Standard |
Weight Lbs (kg) | 51.0 ( 23.0 ) | 66.1 ( 30.0 ) | 70.5 ( 30.0 ) | 165 ( 75.0 ) |
Dimensions in. (mm.) | 20.2 x 7.50 x 10.6 ( x x ) | 24.1 x 7.36 x 12.4 (612 x 187 x 314 ) | 24.7 x 7.60 x 12.7 (627 x 193 x 322 ) | 26.4 x 12.6 x 12.8 (671 x 319 x 324 ) |
Lubrication Type | Dry |
Dry |
Dry |
Dry |
Technology Type | Multi-Stage Roots |
Multi-Stage Roots |
Multi-Stage Roots |
Multi-Stage Roots |
Pump Model | ACP 28 (CV/CP) | ACP 40 (CV/CP) |
---|---|---|
Pumping Speeds |
50 (Hz)
15.9 CFM 450 L/min 7.50 L/s 27.0 m3/hr
60 (Hz)
15.9 CFM 450 L/min 7.50 L/s 27.0 m3/hr |
50 (Hz)
21.8 CFM 616 L/min 10.3 - 21.8 L/s 37.0 m3/hr
60 (Hz)
21.8 - 22.0 CFM 616 - 622 L/min 10.3 - 21.8 L/s 37.0 - 37.4 m3/hr |
Max Water Vapor Pumping Rate (with gas ballast) |
700 g/hr | 700 g/hr |
Ultimate Pressure |
Total With Gas Ballast
2.00 x 10-1 - 3.00 x 10-1 hPA 2.00 x 10-1 - 3.00 x 10-1 mbar 20.0 - 30.0 Pa 1.50 x 10-1 - 2.25 x 10-1 Torr
Total Without Gas Ballast
4.00 x 10-2 hPA 4.00 x 10-2 mbar 4.00 Pa 3.00 x 10-2 Torr |
Total With Gas Ballast
3.00 x 10-1 hPA 3.00 x 10-1 mbar 30.0 Pa 2.25 x 10-1 Torr
Total Without Gas Ballast
4.00 x 10-2 hPA 4.00 x 10-2 mbar 4.00 Pa 3.00 x 10-2 Torr |
Cooling Method(s) |
Method Convection |
Method Convection |
Motor Power HP (kW) | 0.94 ( 0.70 ) | 0.94 ( 0.70 ) |
Inlet Flange | KF25 |
KF40 |
Exhaust Flange | KF25 |
KF25 |
Compression Stages | 6 |
6 |
Series | Standard |
Standard |
Weight Lbs (kg) | 66.1 ( 30.0 ) | 70.5 ( 32.0 ) |
Dimensions in. (mm.) | 24.1 x 7.36 x 12.4 (627 x 193 x 322 ) | 24.1 x 7.36 x 12.4 (627 x 193 x 322 ) |
Lubrication Type | Dry |
Dry |
Technology Type | Multi-Stage Roots |
Multi-Stage Roots |
Ordering Table
(Click column headers to sort data)
Pump Model | Inlet Flange | Voltage & Phases | Manual | Description | Part Number | Price | In Stock | Add To Cart | Accessories | |
---|---|---|---|---|---|---|---|---|---|---|
Pump Model | Inlet Flange | Voltage & Phases | Manual | Description | Part Number | Price | In Stock | Add To Cart | Accessories | |
ACP 15 G | KF25 | 110-230 VAC, 50/60 Hz, 1-Ø, Euro Plug |
|
PFEIFFER ACP 15 G (CORROSIVE) MULTI-STAGE ROOTS DRY PUMP, |
V5GATSRTRF | P.O.R. |
|
— | ||
ACP 15 | KF25 | 90–254 VAC, 50/60 Hz, 1-Ø, US Plug |
|
PUMP, |
V5SATSMFAF | P.O.R. |
|
|
||
ACP 15 | KF25 | 110-230 VAC, 50/60 Hz, 1-Ø |
|
PFEIFFER ACP 15 SD MULTI-STAGE ROOTS DRY PUMP, |
V5SATSMGZF | P.O.R. |
|
— | ||
ACP 15 | KF25 | 200-440 VAC, 50/60 Hz, 3-Ø, 3-Phase Bare End Plug |
|
PFEIFFER ACP 15 SD MULTI-STAGE ROOTS DRY PUMP, |
V5SATSMTRF | P.O.R. |
|
— | ||
ACP 28 (CV/CP) | KF25 | 200-440 VAC, 50/60 Hz, 3-Ø, 3-Phase Bare End Plug |
|
PFEIFFER ACP 28 CV MULTI-STAGE ROOTS DRY PUMP, |
V6GVTSTRHF | P.O.R. |
|
|
||
ACP 28 (CV/CP) | KF25 | 200–440 VAC, 50/60 Hz, 3-Ø |
|
PFEIFFER ACP 28 CV MULTI-STAGE ROOTS DRY PUMP, |
V6GVTSTRVF | P.O.R. |
|
|
||
ACP 28 | KF25 | 110-230 VAC, 50/60 Hz, 1-Ø |
|
PFEIFFER ACP 28 SD MULTI-STAGE ROOTS DRY PUMP, |
V6SATSGZMF | P.O.R. |
|
|
||
ACP 28 | KF25 | 200-440 VAC, 50/60 Hz, 3-Ø, 3-Phase Bare End Plug |
|
PFEIFFER ACP 28 SD MULTI-STAGE ROOTS DRY PUMP, |
V6SATSTRBF | P.O.R. |
|
|
||
ACP 28 | KF25 | 200-440 VAC, 50/60 Hz, 3-Ø, 3-Phase Bare End Plug |
|
PFEIFFER ACP 28 SD MULTI-STAGE ROOTS DRY PUMP, |
V6SATSTRFF | P.O.R. |
|
|
||
ACP 28 | KF25 | 200-440 VAC, 50/60 Hz, 3-Ø, 3-Phase Bare End Plug |
|
PFEIFFER ACP 28 SD MULTI-STAGE ROOTS DRY PUMP, |
V6SATSTRMF | P.O.R. |
|
|
||
ACP 40 G | KF40 | 100–230 VAC, 50/60 Hz, 1-Ø, Euro Plug |
|
PFEIFFER ACP 40 G (CORROSIVE) MULTI-STAGE ROOTS DRY PUMP, |
V8GACSTRBF | P.O.R. |
|
— | ||
ACP 40 (CV/CP) | KF40 | 200-440 VAC, 50/60 Hz, 3-Ø, 3-Phase Bare End Plug |
|
PFEIFFER ACP 40 CV MULTI-STAGE ROOTS DRY PUMP, |
V8GVCSTRHF | P.O.R. |
|
— | ||
ACP 40 (CV/CP) | KF40 | 200–440 VAC, 50/60 Hz, 3-Ø |
|
PFEIFFER ACP 40 CV MULTI-STAGE ROOTS DRY PUMP, |
V8GVCSTRVF | P.O.R. |
|
|
||
ACP 40 | KF40 | 100–230 VAC, 50/60 Hz, 1-Ø, US Plug |
|
PUMP, |
V8SACSGAMF | P.O.R. |
|
— | ||
ACP 40 | KF40 | 100–230 VAC, 50/60 Hz, 1-Ø |
|
PFEIFFER ACP 40 SD MULTI-STAGE ROOTS DRY PUMP, |
V8SACSGZMF | P.O.R. |
|
— | ||
ACP 90 G | KF40 | 200-240 VAC, 50/60 Hz, 1-Ø | — |
PFEIFFER ACP 90 G (CORROSIVE) MULTI-STAGE ROOTS DRY PUMP, |
V9GABSAZRF01 | P.O.R. |
|
— | ||
ACP 90 G | KF40 | 200-240 VAC, 50/60 Hz, 1-Ø | — |
PFEIFFER ACP 90 G (CORROSIVE) MULTI-STAGE ROOTS DRY PUMP, |
V9GABSAZRR01 | P.O.R. |
|
— | ||
ACP 90 G | KF40 | 200-240 VAC, 50/60 Hz, 3-Ø | — |
PFEIFFER ACP 90 G (CORROSIVE) MULTI-STAGE ROOTS DRY PUMP, |
V9GABSBZRR01 | P.O.R. |
|
— | ||
ACP 90 | KF40 | 200-240 VAC, 50/60 Hz, 1-Ø | — |
PFEIFFER ACP 90 SD MULTI-STAGE ROOTS DRY PUMP, |
V9SABSAZMR01 | P.O.R. |
|
— | ||
ACP 90 | KF40 | 200-240 VAC, 50/60 Hz, 1-Ø | — |
PFEIFFER ACP 90 SD MULTI-STAGE ROOTS DRY PUMP, |
V9SABSBZMR01 | P.O.R. |
|
— |
Accessories Table
Description | For Pump Model(s) | Accessory Type | Part Number | Price | In Stock | Add To Cart | |
---|---|---|---|---|---|---|---|
Description | For Pump Model(s) | Accessory Type | Part Number | Price | In Stock | Add To Cart | |
Adixen ES-25-S Oil Mist Eliminator | ACP 15, ACP 28 (CV), ACP 40 (CV) |
|
|
|
|||
Adixen IPF 40 (Inlet Particle Filter), KF40 Flange | ACP 40 CV |
|
|
|
|||
Adixen NRC15 (Noise Reduction Cover) for ACP15 Pumps | ACP 15 |
|
|
|
|||
Centering Ring, SS, QF16, FKM | All ACP Series Pumps |
|
|
|
|||
Centering Ring, SS, QF40, FKM | All ACP Series Pumps |
|
|
|
|||
Clamp for KF25 | All ACP Series Pumps |
|
|
|
|||
Clamp, Aluminum, QF16, Cast 1/2" & 3/4" | All ACP Series Pumps |
|
|
|
|||
Clamp, Aluminum, QF40, Cast 1-1/2" | All ACP Series Pumps |
|
|
|
|||
Clamping Kit, For QF25 Flange, Including Aluminum Clamp and FKM Centering Ring | ACP 15, ACP 28 (CV/CP) |
|
|
|
|||
Clamping Kit, For QF40 Flange, Including Aluminum Clamp and FKM Centering Ring | ACP 40 (CV/CP) |
|
|
|
|||
Fluorocarbon Centering Ring for KF25 | All ACP Series Pumps |
|
|
|
|||
Sound enclosure | ACP 28, ACP 40 |
|
|
|