Representative Image

Edwards EM Series (Small)

E2M0.7 / 1.5

The E2M0.7 and E2M1.5 pumps are two-stage, direct drive, sliding vane pumps. The pump is oil-sealed and designed for reliable, long-term operation. The pump is a free-standing unit. The drive is provided through an Oldham coupling by a totally enclosed fan cooled single phase motor. The pump is well suited for scientific applications such as backing turbomolecular pumps and general laboratory applications.

Applications

Analytical instruments
Leak detectors, helium
Research and development
Backing turbomolecular pumps

Features and Benefits

E2M0.7 has very low sound level of 43dB(A)
The pump is designed for reliable, long-term operation
Compact dimensions
Low energy consumption
Low operating temperature will minimise the heat load on the equipment
The pump is a free-standing unit
The motors are totally enclosed and are cooled by the motor-cooling fan and protected by a thermal overload device
Full height O-ring sealed oil sight glass for easy checking of oil level and condition
Gas ballast valve for water vapour handling capacity
Approved to EN61010, CSA, C22.2 and UL61010

EM18 & EM 28

The EM range of oil-sealed rotary pumps - renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour - have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single-phase or three-phase (four pole) motor.

Applications

Analytical instruments
Leak detectors, helium
Research and development
Backing turbomolecular pumps
Automotive
Beam lines and high energy physics
Centrifuges, ultra-high speed
Coating

Features and Benefits

The pump is designed for reliable, long-term operation
Thermal overload device prevents overheating (single phase only)
The drive is provided through a flexible coupling by a single-phase or three-phase (four pole) motor
The motors are totally enclosed and are cooled by the motor cooling fan
Full height O ring sealed oil sight glass for easy checking of oil level and condition
Large sight glass and operating oil range

Dimensional Drawings

Charts

Specifications Table

Pump Model	E2M0.7	E2M1.5	E1M18	E2M18	E2M28
Pumping Speeds	50 (Hz) 0.44 CFM 12.5 L/min 0.21 L/s 0.75 m³/hr 60 (Hz) 0.50 CFM 14.2 L/min 0.24 L/s 0.85 m³/hr	50 (Hz) 0.94 CFM 26.7 L/min 0.44 L/s 1.60 m³/hr 60 (Hz) 1.18 CFM 33.3 L/min 0.56 L/s 2.00 m³/hr	50 (Hz) 10.0 CFM 283 L/min 4.70 L/s 17.0 m³/hr 60 (Hz) 12.0 CFM 340 L/min 5.70 L/s 20.4 m³/hr	50 (Hz) 10.0 CFM 283 L/min 4.70 L/s 17.0 m³/hr 60 (Hz) 12.0 CFM 340 L/min 5.70 L/s 20.4 m³/hr	50 (Hz) 16.2 - 19.0 CFM 458 - 536 L/min 7.64 - 8.91 L/s 27.5 - 32.2 m³/hr 60 (Hz) 19.5 - 22.3 CFM 552 - 631 L/min 9.20 - 10.5 L/s 33.1 - 37.9 m³/hr
Ultimate Pressure	Partial With Gas Ballast 2.00 x 10^-1 hPA 2.00 x 10^-1 mbar 20.0 Pa 1.50 x 10^-1 Torr Partial Without Gas Ballast 7.00 x 10^-4 hPA 7.00 x 10^-4 mbar 7.00 x 10^-2 Pa 5.25 x 10^-4 Torr Total Without Gas Ballast 3.00 x 10^-3 hPA 3.00 x 10^-3 mbar 3.00 x 10^-1 Pa 2.25 x 10^-3 Torr	Partial With Gas Ballast 2.50 x 10^-2 hPA 2.50 x 10^-2 mbar 2.50 Pa 1.88 x 10^-2 Torr Partial Without Gas Ballast 5.00 x 10^-4 hPA 5.00 x 10^-4 mbar 5.00 x 10^-2 Pa 3.75 x 10^-4 Torr Total Without Gas Ballast 1.50 x 10^-3 hPA 1.50 x 10^-3 mbar 1.50 x 10^-1 Pa 1.13 x 10^-3 Torr	Partial With Gas Ballast 6.50 x 10^-1 hPA 6.50 x 10^-1 mbar 65.0 Pa 4.88 x 10^-1 Torr Partial Without Gas Ballast 6.50 x 10^-1 hPA 6.50 x 10^-1 mbar 65.0 Pa 4.87 x 10^-1 Torr Total Without Gas Ballast 3.00 x 10^-2 hPA 3.00 x 10^-2 mbar 3.00 Pa 2.25 x 10^-2 Torr	Partial With Gas Ballast 3.75 x 10^-3 hPA 5.00 x 10^-3 mbar 5.00 x 10^-1 Pa 3.70 x 10^-5 Torr Partial Without Gas Ballast 1.00 x 10^-4 hPA 1.00 x 10^-4 mbar 1.00 x 10^-2 Pa 7.50 x 10^-5 Torr Total Without Gas Ballast 1.00 x 10^-3 hPA 1.00 x 10^-3 mbar 1.00 x 10^-1 Pa 7.50 x 10^-4 Torr	Partial With Gas Ballast 2.00 x 10^-1 hPA 2.00 x 10^-1 mbar 20.0 Pa 1.50 x 10^-1 Torr Partial Without Gas Ballast 1.00 x 10^-3 hPA 1.00 x 10^-3 mbar 1.00 x 10^-2 - 1.00 x 10^-1 Pa 7.50 x 10^-4 Torr Total With Gas Ballast 2.00 x 10^-1 hPA 2.00 x 10^-1 mbar 20.0 Pa 1.50 x 10^-1 Torr Total Without Gas Ballast 1.00 x 10^-3 hPA 1.00 x 10^-3 mbar 1.00 x 10^-1 Pa 7.50 x 10^-4 Torr
Cooling Method(s)	Method Convection	Method Convection	Method Convection	Method Convection	Method Convection
Oil Type(s)	Hydrocarbon Oil Part: KJLSS19Q1	Hydrocarbon Oil Part: KJLSS19Q1	Hydrocarbon Oil Part: KJLSS19Q1	Hydrocarbon Oil Part: KJLSS19Q1	Hydrocarbon Oil Part: KJLSS19Q1

X CLOSE

Notes:

ATEX versions available; please call or visit our website for more information.
Hydrocarbon prepared pumps will be shipped with one charge of oil.
Power cord is not included and will need to be purchased separately based on regional plug type.
PFPE prepared pumps will require purchase of PFPE oil separately.

Ordering Table

X CLOSE

Pump Model	Inlet Flange	Voltage & Phases	Manual	Description	Part Number	Price	In Stock	Add To Cart	Accessories
Pump Model	Inlet Flange	Voltage & Phases	Manual	Description	Part Number	Price	In Stock	Add To Cart	Accessories
E1M18	KF25	115/200-230 VAC, 50/60 Hz, 1-Ø		Edwards Vacuum E1M18 Rotary Vane Pump, Hydrocarbon Oil, KF25 inlet flange, 17 m^3/hr at 50Hz / 12 CFM at 60Hz, Convection cooling, 115/200-230 VAC, 50/60 Hz, 1-Ø, Mains Cable Not Included	A34317984	$6,067.00
E2M18	KF25	115/200-230 VAC, 50/60 Hz, 1-Ø		Edwards Vacuum E2M18 Rotary Vane Pump, Hydrocarbon Oil, KF25 inlet flange, 17 m^3/hr at 50Hz / 12 CFM at 60Hz, Convection cooling, 115/200-230 VAC, 50/60 Hz, 1-Ø, Mains Cable Not Included	A36317984	$7,034.00
E2M1.5	KF10	100-120 VAC, 50/60 Hz, 1-Ø		Edwards Vacuum E2M1.5 Rotary Vane Pump, Hydrocarbon Oil, KF10 inlet flange, 1.61 m^3/hr at 50Hz / 1.18 CFM at 60Hz, Convection cooling, 100-120 VAC, 50/60 Hz, 1-Ø, Mains Cable Not Included	A37132902	$3,062.00
E2M1.5	KF10	200-230 VAC, 50/60 Hz, 1-Ø		Edwards Vacuum E2M1.5 Rotary Vane Pump, Hydrocarbon Oil, KF10 inlet flange, 1.61 m^3/hr at 50Hz / 1.18 CFM at 60Hz, Convection cooling, 200-230 VAC, 50/60 Hz, 1-Ø, Mains Cable Not Included	A37132919	$3,062.00
E2M0.7	KF10	100-120 VAC, 50/60 Hz, 1-Ø		Edwards Vacuum E2M0.7 Rotary Vane Pump, Hydrocarbon Oil, KF10 inlet flange, 0.75 m^3/hr at 50Hz / 0.5 CFM at 60Hz, Convection cooling, 100-120 VAC, 50/60 Hz, 1-Ø, Mains Cable Not Included	A37141902	$2,996.00
E2M0.7	KF10	200-230 VAC, 50/60 Hz, 1-Ø		Edwards Vacuum E2M0.7 Rotary Vane Pump, Hydrocarbon Oil, KF10 inlet flange, 0.75 m^3/hr at 50Hz / 0.5 CFM at 60Hz, Convection cooling, 200-230 VAC, 50/60 Hz, 1-Ø, Mains Cable Not Included	A37141919	$2,996.00
E2M28	KF25	115/200-230 VAC, 50/60 Hz, 1-Ø		Edwards Vacuum E2M28 Rotary Vane Pump, Hydrocarbon Oil, KF25 inlet flange, 27.5 m^3/hr at 50Hz / 19.5 CFM at 60Hz, Convection cooling, 115/200-230 VAC, 50/60 Hz, 1-Ø, Mains Cable Not Included	A37317984	$8,653.00

CloseX

X CLOSE

Your Ultimate Vacuum Pump Selection Guide is Here!

Find your perfect pump with ease! Our NEW comprehensive Vacuum Pump Selection Guide allows you to cross-reference over 450 vacuum pumps, search various pump types based on multiple criteria, and offers both new and remanufactured options. Still can't find the vacuum pump you're looking, click here to contact us.

Accessories Table

Description	For Pump Model(s)	Accessory Type	Part Number	Price	In Stock	Add To Cart
Description	For Pump Model(s)	Accessory Type	Part Number	Price	In Stock	Add To Cart
Clamp for KF25	E2M18 E1M18 E2M28	Hardware	QF25-100-C	$8.80
Clamp, Aluminum, QF16, Cast 1/2" & 3/4"	E2M0.7 E2M1.5	Hardware	QF16-075-C	$6.95
Clamping Kit, For QF10 Flange, Including Aluminum Clamp and FKM Centering Ring	E2M0.7, E2M1.5	KF Hardware Kit	QF10-HDKIT	$14.95
Clamping Kit, For QF25 Flange, Including Aluminum Clamp and FKM Centering Ring	E1M18, E2M18, E2M28	KF Hardware Kit	QF25-HDKIT	$19.60
Edwards EMF20 Oil Mist Eliminator	E1M18 E2M18	Exhaust Accessory	A46229000	$482.00
Edwards EMF3 Oil Mist Eliminator	E2M0.7 E2M1.5	Exhaust Accessory	A46220000	$314.00
Edwards Repair Kit for E1M18, E2M18	E1M18 E2M18	Repair Kit	A36301131	$339.00
Edwards Repair Kit for E2M0.7 and E2M1.5	E2M0.7 E2M1.5	Repair Kit	A37101131	$256.00
Fluorocarbon Centering Ring for KF10	E2M0.7 E2M1.5	Hardware	QF10-050-SRV	$7.75
Fluorocarbon Centering Ring for KF25	E2M18 E1M18 E2M28	Hardware	QF25-100-SRV	$11.25
KJLC 300 Convection Enhanced Pirani, KF16	All EM Series Pumps	Gauge	KJL300806	$795.00
KJLSS19 Hydrocarbon Oil (1 Gallon)	All EM Series Pumps	Hydrocarbon Oil	KJLSS19G1	$57.00
KJLSS19 Hydrocarbon Oil (1 quart)	All EM Series Pumps	Hydrocarbon Oil	KJLSS19Q1	$22.00
Mains Cable with CEE 7.7 Plug (Northern Europe) for single phase pumps, 2m length	E1M18, E2M18, E2M28	Mains Cable	A50506003	P.O.R.
Mains Cable with CEE 7.7 Plug (Northern Europe) for single phase pumps, 2m length	E2M0.7, E2M1.5	Mains Cable	A50506000	P.O.R.
Mains Cable with NEMA 5-15 (N.A. / Japan) Plug for single phase, 2m length	E1M18, E2M18, E2M28	Mains Cable	A50507003	$77.10
Mains Cable with NEMA 5-15 (N.A. / Japan) Plug for single phase, 2m length	E2M0.7, E2M1.5	Mains Cable	A50507000	$56.59
Mains Cable with Type G (UK) Plug for single phase pumps, 2m length	E1M18, E2M18, E2M28	Mains Cable	A50505003	P.O.R.
Mains Cable with Type G (UK) Plug for single phase pumps, 2m length	E2M0.7, E2M1.5	Mains Cable	A50505000	$52.43
Mains Cable with flying leads for single phase pumps, 2m length	E1M18, E2M18, E2M28	Mains Cable	A50508003	P.O.R.
Mains Cable with flying leads for single phase pumps, 2m length	E2M0.7, E2M1.5	Mains Cable	A50508000	$52.00
Oil Mist Eliminator	E2M28	Oil Mist Eliminator	A46233000	$1,749.24
Power Supply, KJLC 275i or 300, US Plug End	All EM Series Pumps	Gauge Power Cable	KJLPS401A	$96.00
Repair Kit	E2M28	Repair Kit	A37301131	$399.00
Replacement Blade (Vane) Kit	E1M18	Replacement Blade (Vane) Kit	A34301041	$367.00
Replacement Blade (Vane) Kit	E2M18	Replacement Blade (Vane) Kit	A36301020	$598.00
Replacement Blade (Vane) Kit	E2M28	Replacement Blade (Vane) Kit	A37301135	$569.00
Replacement Vane Kit for E2M0.7 and E2M1.5	E2M0.7 E2M1.5	Repair Kit	A37101132	$248.00

CloseX