Gate Valves for Gas Analysis with Bypass (Series 010)
Search Products in Series 010
| {{i.DN}} | {{i.MATERIAL}} | {{i.FLANGE}} | {{i.ACTUATOR}} |
For pressure reduction of the process gas by means of two bypass valves with orifice.
Specifications Table
| Series Number | 010 |
|---|---|
| Series Name | Gate Valves for Gas Analysis with Bypass |
| Description | For pressure reduction of the process gas by means of two by-pass valves with orifice. Analysis of the residual gases at base pressure with the open valve. |
| Actuator Types | Manual actuator (hand wheel), Pneumatic actuator (double acting), Pneumatic actuator (double acting), Pneumatic actuator (single achting with closing spring NC) |
| Sealing Technology | MONOVAT-System |
| Sealing Gate | FKM (VITON®) |
| Sealing Bonnet | Metal |
| Feedthrough | Bellows |
| Leak Rate - Body | < 5 . 10-10 mbar ls-1 |
| Leak Rate - Seat | < 1 . 10-9 mbar ls-1 |
| Nominal inside diameters (ID) in mm (inches) | 25 (1") - 40 (1 1/2") |
| Body material | Stainless steel |
Dimensional Drawings
Actuator
Solenoid for impulse actuation: actual valve position is maintained at power failureSolenoid separate, for external mounting
Solenoid for 12, 48 V DC
Solenoid for 24, 48, 100, 115, 200, 230 V / 50 Hz
Solenoid for 24, 100, 115, 200, 230 V / 60 Hz
Manual emergency operation on solenoid lockable
Manual actuator with position indicator
Position indicator for 200°C with connecting cable 0.3 m contact rating: 1A / 48V AC, 1A / 72V DC
Pneumatic actuator, single acting with opening spring (NO)
Version for 1 Mio cycles (special bellows)
Valve
Customer specified flangesInsert version for integration into the vacuum system (without body)
Other sealing materials (Chemraz, EPDM etc.)
Window in gate: with seal made of VITON, exchangeable
Special valve gate, suitable to install various foils or orifices
Gate valve for gas analysis
With by-pass valves for gas analysis at high pressures
Gate valve with protective ring