KJLC392402YD TRANSDUCER, COMBINATION, HOT ION GAUGE ONLY W/ ABILITY TO CONTROL 2X SEPARATE CONVECTION GAUGES, INTEGRATED DISPLAY AND CONTROLLER, DUAL YTTRIA FILAMENT, KF40 FLANGE. NOTE: POWER SUPPLY, CONVECTION GAUGES AND 2ND INTERCONNECT CABLE SOLD SEPERATELY, ONE HB

SKU: SKU0182846

Unit Price:

$2,307.00

Availability:

KJLC will contact you.

Notes:

Included when you purchase a KJLC 392 series gauge is one 10ft interconnect cable to connect the 392 to one of our KJLC 275 series convection gauges. The convection gauge(s), power supply and, if needed, additional interconnect cable must be ordered separately.

Specifications

Technology	Hot Filament Ion Gauge / Convection Enhanced Pirani
Measurements	Torr Min: 1.00×10^-9 Max: 1000 mbar Min: 1.33×10^-9 Max: 1333
Units	Pa Torr mbar
Temperature	Operating Min: 0 ºC Max: 40.0 ºC Min: 32.0 ºF Max: 104 ºF Storage Min: -40.00 ºC Max: 70.0 ºC Min: -40.00 ºF Max: 158 ºF Bakeout 200 ºC 392 ºF
Materials Exposed to Vacuum	316/304 Stainless Steel Glass Nickel Tantalum Tungsten Yttria-Coated Iridium or Optional Tungsten Filaments
Connectors	9 pin Sub D Male
Typical Accuracy	Ionization: ± 15% of reading (1.00×10^-8 to 5.00×10^-2 Torr) Convection: ± 10% of reaching (1.00×10^-3 to 400 Torr); ± 2.5% of reading (400 to 1000 Torr)
Accuracy Range	11 to 20%
Display Type	Digital
Set-Point Relays	3.00
Relay Response	1A at 30 VDC resistive 0.3 A at 125 VAC non-inductive
Analog Output	Ionization only: 0 to 9 VDC 1 V/decade Used as a full range gauge: 0.5 to 7 VDC 0.5 V/decade sConvection Gauge 1 & 2: 1-8 VDC 1 V/decade or 0.375 to 5.659 VDC
Recommended Mounting Orientation	Any
Input Power	20 to 28 VDC 30 W protected against power reversal and transient over-voltages
Communications (Standard)	Analog RS485
Compliance and Standards	CE RoHS
Integrated Electronics	Yes
Emmision Current (uA)	100
Emmision Current (mA)	4
De-Gas (EB)	3W Electron Bombardment
X-Ray Limit (Torr)	< 5.00×10^-10
X-Ray Limit (mbar)	< 6.70×10^-10
Filament Count	2.00
Filament Type	Yttria-Coated Iridium
Flange	KF40
Weight (pounds)	0.6
Weight (kg)	0.27

Accessories Table

X CLOSE

More Info	Description	Accessory Type	Part Number	Price	Ready to Ship	Add Item	Combine How to Combine - Click the checkboxes of the parts you would like to purchase and then click the button below to add all parts selected into your Cart.
More Info	Description	Accessory Type	Part Number	Price	Ready to Ship	Add Item	Combine How to Combine - Click the checkboxes of the parts you would like to purchase and then click the button below to add all parts selected into your Cart.
	KJLC 275 to KJLC 392 , 10ft. (3m)	Interconnect Cable	HB431-1-10F	$112.00			Combine
	KJLC 275 to KJLC 392 , 25ft. (8m)	Interconnect Cable	HB431-1-25F	$137.00	KJLC will contact you		Combine
	KJLC 275 to KJLC 392 , 50ft. (15m)	Interconnect Cable	HB431-1-50F	P.O.R.	KJLC will contact you		Combine
	DN40 ISO-KF	KJLC 392 Replacement Sensor	IG4YD	$427.00			Combine
	KJLC 275 Series Gauge Tube, DN40 ISO-KF - other flange types available	Convection Gauge Tube	KJL275316	$283.00	KJLC will contact you		Combine
	24 VDC (100-240 VAC) No mains cable included.	Power Supply	KJLPS501X	$226.00	KJLC will contact you		Combine
	9 pin Sub D, 24 VDC (100-240 VAC), US Plug	Power Supply	PS501A	$134.00	KJLC will contact you		Combine
	Aluminum Clamp, DN40 ISO-KF Flange	Clamp	QF40-150-C	$10.15			Combine

Include Main Part: KJLC392402YD

X CLOSE

KJLC392402YD TRANSDUCER, COMBINATION, HOT ION GAUGE ONLY W/ ABILITY TO CONTROL 2X SEPARATE CONVECTION GAUGES, INTEGRATED DISPLAY AND CONTROLLER, DUAL YTTRIA FILAMENT, KF40 FLANGE. NOTE: POWER SUPPLY, CONVECTION GAUGES AND 2ND INTERCONNECT CABLE SOLD SEPERATELY, ONE HB

KJLC392402YD

Specifications

Accessories Table

Related Products