Apiezon Wax W Sealant
Apiezon® W is a versatile, chemically inert wax compound that is solid at ambient temperatures, and is used for rigid permanent or semi-permanent joint sealing. Apiezon® W wax has “gettering” qualities, like their greases, coupled with high purity and clean meltdown properties allow this wax to absorb greasy or chemical impurities on metal/glass surfaces. Apiezon® W wax is used in the manufacturing of silicon transistors and integrated circuits due to its resistance to etching fluids (hydrofluoric, nitric, and acetic acids). Apiezon® W wax is also used as a protective coating for printed circuits to ensure protection of the copper circuit from acid etching processes and air oxidation. Apiezon® W wax also serves as an excellent mounting media for permanent and temporary adhesives for silicon chips. The wax can be dissolved in a hydrocarbon or chlorinated solvent (or melt and apply directly), applied, and a thin film of wax forms after the solvent evaporates.
Features
- Particularly suitable for sealing joints that may become warm in operation
- Joint sealing over widest temperature range
- Most resistant to reactions by acid and alkalis
- Resistant to water, water vapor, and atmospheric moisture in vacuum applications
- Low vapor pressure
- Jointing and mounting media
- Etch fluid resistant
Specifications Table
| Vapor Pressure | |
| Specific Heat | |
| Temperature Range | |
| Thermal Conductivity | |
| Volume Resistivity | |
| Permitivity | |
| Loss Tangent | |
| Approx. Softening Point | |
| Temp. for Application | |
| Pack | |
| Solubility of Water (ppm by wt) |
Vacuum Properties
Apiezon® W wax is an effective sealant for vacuum systems down to 10-9 torr at ambient temperatures. The wax is also effective with vacuum systems that run at small positive pressures. Apiezon® W wax offers as a superior waterproof medium to provide a complete seal against liquid water, water vapor, and atmospheric moisture in vacuum systems. Its low vapor pressure characteristics allow Apiezon® W wax to be used in thin film deposition applications as a protection against contamination of the thin film deposits.
Charts
It is strongly recommend using all fluids and greases at the time of receipt, however when storage is necessary, rotate older stock into use first and observe the recommended parameters listed below.
Apiezon
All Apiezon products have a shelf life of 10 years if unopened in their original container and stored at ambient temperatures. If the product has been opened, resealed and then stored in clean, dry, dark environment under ambient conditions in the original container, it should last up to 10 years, but this is not guaranteed.
Ordering Table
All dimensions listed below, unless otherwise stated, are in grams.
